PRO III Mono Range

Using Proven PLL-PRO III technology, this very high performance Transmitter (500 mW version) is especially suited for New Zealand LPFM broadcasters who enjoy the use of the special low power license now available in NZ. This product shares the incredible ground plane area of the full blown 4W version and uses amplifier devices rated for an output of 2.5W! The result is a very cool running, ultra stable and reliable low power Professional Exciter. Incorporating unique NRG circuit design, all the benefits are here at low cost. Features such as an exceptional S/N ratio, ultra linear modulation and very low spurious, make this the ideal Transmitter to deliver a pure 500milliwatts of RF power to a correctly matched half wave dipole antenna. The PLL PRO 3 design uses wide-band power amplifier technology, this eliminates the need to "tune up" the transmitter to "peak the power". The power output is even compensated against temperature variation so the power output remains constant regardless of ambient temperature!

THIS PRODUCT IS IDEAL FOR NEW ZEALAND RFS29 OPERATION!

If you demand the best, it's here! No frequency drift, rock solid power and the ultimate sound quality in one superb package. This is the NRG PLL PRO 3, now recognised as the leader in high power pll transmitters. Incorporating unique NRG circuit design, it delivers a stunning 4 watts of RF power to a correctly matched antenna. The output power is selectable from 1 watt to 4 watts via an on-board jumper switch. The PLL PRO 3 design uses wide-band power amplifier technology, this eliminates the need to tune up the transmitter to "peak the power".The design is so stable that the RF power output will remain constant even at high ambient temperatures, there is no power slump with this transmitter! Just compare the massive 4 watts (4000mW)output to the inadequate 800mW flea power units from some of our competitors!

THE NRG 10 AND 20 WATT FM TRANSMITTERS
FOR PORTABLE OR BASE OPERATION

Here are two transmitters which offer straightforward top level performance and suitable for almost any professional low power broadcasting application. They are lightweight and compact whilst being very efficient. You will require a 13.8 volt power supply unit or alternatively, these transmitters will run from a car battery…..No Problem!

40 WATT FM TRANSMITTER

With selectable 15/40 watts output, PLL-PRO 3 driver and BLW60 linear power amplifier all in one enclosure, this unit offers exceptional power output and stability at a super low price. Despite it's high power output, this exciter runs cool thanks to a powerful 80mm fan operated depression cooling system. Complete 87.5 – 108 MHz coverage is obtained and frequency set-up is simple. Thanks to the PLL-PRO 3 driver, an excellent signal to noise ratio is guaranteed, out of lock power down is standard (and essential!) and you are assured of the legendary NRG modulation standards. Unlike inferior products, the PLL-PRO 40-watt unit has frequency pre-correction in the drive to the PA stage to maintain a flat response from 87.5 to 108. It does not rely on saturating the PA to level the output!

DESIGNED BY NRG - - LATEST PRODUCT - - 0/50W FM TRANSMITTER WITH WIDE-BAND AMP

The latest Transmitter is very simple to set-up! Set the frequency, adjust the power output, away you go and the SWR checks condition of the Antenna! The 5 bright LED's show the main conditions that let you know things are correct!